Engine Lub Oil Conditioning System-ATEEE
产品中心
Current location:Home - Product Center... - Auxiliary System... - Conditioning System... - ATEEE-JY Engine Lub ...

Conditioning System

ATEEE-JY Engine Lub Oil Conditioning System

  • ATEEE-JY Engine Lub Oil Conditioning System
  • ATEEE-JY Engine Lub Oil Conditioning System
Summary Specification

 Basic Configuration

●      Temp. Control Range: 70~140℃

●      Temp. Control Accuracy: ±1℃(Lub oil temperature at engine inlet)

●      Analog I/O: 4~20mA or 0~10V

●      External lub oil supply system with automatic pressure control

●      With automatic lub oil heating and cooling units

●      Digital port (such as RS232C/RS485)

●      With cooling water filter, mesh aperture: 50μm

●      General Parameter: max. flow: 200L/min

●      Oil Supply Pressure: 0-6bar

●      Temperature Stability: ±1℃

●      Application Cases: engine with max. power of 600kW

●      With 36kW heater


■    Basic Data

 


Type

Parameter

ATEEE-JY  Engine Lub Oil Conditioning System

JY30

JY100

JY300

Control Precision

±01

±01

±1

Max. Cooling PowerkW

30

30

60

Max. Range of Temperature Control

45~130

45~130

85~130

Heating PowerkW

(Equipment with automatic lub oil heater)

9

9

9

Max. Power ConsumptionkW

10(380V)

10(380V)

10(380V)

Connection Pipe SizeDN

DN25Inlet and outlet of lub oil

DN25Inlet and outlet of cooling water

Weightkg

~60

Applicable Engine PowerkW

Small/ medium power engine, less than 200kW

Small/ medium power engine, less than600kW

Small/ medium power engine, less than1000kW

Max. Cooling Water Flow(L/min)

30

100

200

Cooling Water

Water temp. at inlet of cooler≤32 (35max.

Pressure 0.2-0.3 MPaFlow Rate 18t/h

Lub Oil Pump

(External Lub Oil Supply System with Automatic Pressure Regulation)

 Pressure: 0.8MPa

Analog Quantity I/O

4~20mA or 0~10V

Digital Interface

e.g. RS232C/RS485

With cooling water filter

 mesh aperture 50μm

 

Special Accessories

Oil pump unit

With a circulation pump, oil and smoke from the engine oil pan and then back to the oil pan, pressure adjusting range is 0.5-8 bar.

The 90 heating unit

Ensure low load temperature can reach the highest setting temperature

When the system with heating device, can make your warm-up time shortened, constant temperature heating is to use an indirect heating, such as heating cooling fluid, then heating oil through the plate.

Use electric heating, heating tank, water pump

 

The 150 heating unit

Ensure low load temperature can reach the highest setting temperature

When the system with heating device, can make your warm-up time shortened, constant temperature heating is to use an indirect heating, such as heating cooling fluid, then heating oil through the plate.

By electric heating, heating tank, pumps, plate, water tank.

Flow range testing unit

The oil equipment oil outlet with flow meter accuracy±0.5%

other options

19 inch case, 4U, can be inserted into the engine test bench

The portable case

Online case

 

Using hot water heating or steam heating unit

 

no pump, by the oil filter for constant temperature