产品中心
Current location:Home - Product Center... - Test Bed Fuel & Gas... - Fuel Consumption... - Lub-Oil Automatic Co... - Real-time Diesel Eng...

Lub-Oil Automatic Consumption Flow Meter for Engines

Real-time Diesel Engine Lubricant Soot Measurements

  • Real-time Diesel Engine Lubricant Soot Measurements
  • Real-time Diesel Engine Lubricant Soot Measurements
Summary Specification
BTSA Overview
In the world of lubrication oil soot measurements on diesel engines, the BTSA saves time and money
by compressing 100 to 500-hour tests into a few minutes. The methodology through which this is accomplished requires extreme measurement precision and a very robust continuous oil sampling system. This combination
allows engine oil to be continuously circulated from the engine to the instrument and back during
measurements. The oil soot is measured with an extremely sensitive optical subsystem that provides fast and precise soot concentration measurements in real time.

A rate is calculated by analyzing the trends associated with the soot accumulation in time. This process is normally accomplished in under 15 minutes. The rate is then translated into a predicted concentration at a specified number of hours, i.e., 100 or 250 hours. Therefore, engine testing for lubricant oil soot can be accomplished in a few minutes instead of weeks or months, saving time and significantly lowering cost.

Moreover, by allowing an engineer to acquire a soot rate in minutes, routine acquisition of entire soot maps can be achieved in a few hours. Today’s engines are equipped with many variable controls, such as VG turbochargers, variable rate EGR, pilot injection, injection rate shaping, expansion cooling, etc., and it is critical to have fast analysis equipment in order to characterize all of the resultant effects in a reasonable amount of time.

Simple to install and use, Robust, Reliable, Fast and Accurate
The BTSA utilizes an integral pump that circulates the oil from and back to the engine during engine operation. A small amount of that oil is routed through a sample conditioning system and then into an optical module where it is analyzed for the soot concentration. This concentration is accurately measured with precision approaching 0.0001% by weight, and this process is repeated each 6 seconds. As soot accumulates in the oil during engine operation, the measurement precision is sufficient to generate smooth and reproducible accumulation trends that allow accurate predictions over hundreds of hours to be calculated.

This capability enables an engineer to acquire soot rates in about the same amount of time that is normally taken for steady state emissions, performance and fuel measurements. The BTSA has proven to be an essential tool for comprehensive product development.
Please contact us at AEI at 1(812)-376-6472 for additional information.

What is Lubricant Oil Soot?
Lubricant soot is a by-product of diesel combustion. Soot is formed in fuel-rich, cool regions of the combustion chamber and impinges on the cylinder wall, where it is scraped into the engine oil sump by the piston rings. Soot is partially burnt fuel which results in a heterocyclic hydrocarbon particle.

Upon entering the engine oil sump, the soot is rapidly mixed in with the bulk oil and circulates throughout the engine. As oil passes through the engine gears, the soot particles are ground into extremely fine particles, nominally 1000 Angstroms, and are maintained in suspension by the lubricant dispersants.